Buy ONET/DOT: Download
TITLE: Electric Motor Assemblers
DEFINITION: Assemble and test subassemblies and parts of electric motors and generators.
TASKS:
1. Tests windings for motor-housing clearance, grounds, and circuits, using gauge, growler, spring-steel blade, telephone receiver, insulation tester, and resistance bridge.
2. Assembles and attaches end brackets to motor housing, and fastens assembly with screws.
3. Inspects cores to be used in assembling electric motors and generator stators for defects and files burns from core slots.
4. Winds new coils and rewinds defective coils on armatures, stators, or rotors of used motors and generators.
5. Aligns and slips coils over insulated core and bolts core in place.
6. Drills and taps bolt holes to secure clamps connecting cable between coils.
7. Bolts field windings and brush holders into housing of dynamotors, converters, and electric motors, using hand tools and holding device.
8. Presses bushing and bearings into motor head and secures fans and gears to armature shaft, using press, nuts, and washers.
9. Places armature in bearing and solders electrical leads to brushes and switch and cord assembly.
10. Cuts, strips, bends, and twists wire and metal strips used in assembly of electric motors and generator stators, using hand tools.
11. Replaces defective parts in motors and electrical equipment, using wrenches, screwdrivers, holding fixture, nuts, and bolts.
12. Lubricates gears and other moving parts, using grease gun, and turns shaft to ensure free movement of assembled parts.
KNOWLEDGE:
Knowledge elements are ranked by importance.
88 Mechanical
Knowledge of machines and tools, including their designs, uses, benefits, repair, and maintenance
54 Engineering and Technology
Knowledge of equipment, tools, mechanical devices, and their uses to produce motion, light, power, technology, and other applications
50 Production and Processing
Knowledge of inputs, outputs, raw materials, waste, quality control, costs, and techniques for maximizing the manufacture and distribution of goods
46 Computers and Electronics
Knowledge of electric circuit boards, processors, chips, and computer hardware and software, including applications and programming
42 Physics
Knowledge and prediction of physical principles, laws, and applications including air, water, material dynamics, light, atomic principles, heat, electric theory, earth formations, and meteorological and related natural phenomena
29 Telecommunications
Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems
21 Public Safety and Security
Knowledge of weaponry, public safety, and security operations, rules, regulations, precautions, prevention, and the protection of people, data, and property
21 Mathematics
Knowledge of numbers, their operations, and interrelationships including arithmetic, algebra, geometry, calculus, statistics, and their applications
17 Chemistry
Knowledge of the composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods
13 Building and Construction
Knowledge of materials, methods, and the appropriate tools to construct objects, structures, and buildings
13 English Language
Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar
8 Customer and Personal Service
Knowledge of principles and processes for providing customer and personal services including needs assessment techniques, quality service standards, alternative delivery systems, and customer satisfaction evaluation techniques
4 Design
Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models
4 Psychology
Knowledge of human behavior and performance, mental processes, psychological research methods, and the assessment and treatment of behavioral and affective disorders
4 Transportation
Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including their relative costs, advantages, and limitations
4 Medicine and Dentistry
Knowledge of the information and techniques needed to diagnose and treat injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures
4 Communications and Media
Knowledge of media production, communication, and dissemination techniques and methods including alternative ways to inform and entertain via written, oral, and visual media
4 Law, Government and Jurisprudence
Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process
4 Biology
Knowledge of plant and animal living tissue, cells, organisms, and entities, including their functions, interdependencies, and interactions with each other and the environment
SKILLS:
Skills elements are ranked by importance.
75 Testing
Conducting tests to determine whether equipment, software, or procedures are operating as expected
67 Product Inspection
Inspecting and evaluating the quality of products
58 Installation
Installing equipment, machines, wiring, or programs to meet specifications
54 Repairing
Repairing machines or systems using the needed tools
50 Equipment Selection
Determining the kind of tools and equipment needed to do a job
46 Operation and Control
Controlling operations of equipment or systems
42 Problem Identification
Identifying the nature of problems
33 Troubleshooting
Determining what is causing an operating error and deciding what to do about it
33 Equipment Maintenance
Performing routine maintenance and determining when and what kind of maintenance is needed
29 Information Organization
Finding ways to structure or classify multiple pieces of information
29 Operation Monitoring
Watching gauges, dials, or other indicators to make sure a machine is working properly
21 Technology Design
Generating or adapting equipment and technology to serve user needs
21 Reading Comprehension
Understanding written sentences and paragraphs in work related documents
21 Solution Appraisal
Observing and evaluating the outcomes of a problem solution to identify lessons learned or redirect efforts
21 Science
Using scientific methods to solve problems
21 Monitoring
Assessing how well one is doing when learning or doing something
13 Information Gathering
Knowing how to find information and identifying essential information
8 Learning Strategies
Using multiple approaches when learning or teaching new things
8 Active Learning
Working with new material or information to grasp its implications
8 Critical Thinking
Using logic and analysis to identify the strengths and weaknesses of different approaches
8 Mathematics
Using mathematics to solve problems
8 Identification of Key Causes
Identifying the things that must be changed to achieve a goal
4 Writing
Communicating effectively with others in writing as indicated by the needs of the audience
4 Speaking
Talking to others to effectively convey information
4 Idea Evaluation
Evaluating the likely success of an idea in relation to the demands of the situation
4 Active Listening
Listening to what other people are saying and asking questions as appropriate
4 Judgment and Decision Making
Weighing the relative costs and benefits of a potential action .
ABILITIES:
Abilities elements are ranked by importance.
83 Manual Dexterity
The ability to quickly make coordinated movements of one hand, a hand together with its arm, or two hands to grasp, manipulate, or assemble objects
83 Finger Dexterity
The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects
83 Visualization
The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged
83 Information Ordering
The ability to correctly follow a given rule or set of rules in order to arrange things or actions in a certain order. The things or actions can include numbers, letters, words, pictures, procedures, sentences, and mathematical or logical operations.
71 Problem Sensitivity
The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
71 Arm-Hand Steadiness
The ability to keep the hand and arm steady while making an arm movement or while holding the arm and hand in one position
71 Control Precision
The ability to quickly and repeatedly make precise adjustments in moving the controls of a machine or vehicle to exact positions
71 Wrist-Finger Speed
The ability to make fast, simple, repeated movements of the fingers, hands, and wrists
71 Static Strength
The ability to exert maximum muscle force to lift, push, pull, or carry objects
71 Visual Color Discrimination
The ability to match or detect differences between colors, including shades of color and brightness
67 Memorization
The ability to remember information such as words, numbers, pictures, and procedures
58 Trunk Strength
The ability to use one's abdominal and lower back muscles to support part of the body repeatedly or continuously over time without "giving out" or fatiguing
58 Near Vision
The ability to see details of objects at a close range (within a few feet of the observer)
58 Extent Flexibility
The ability to bend, stretch, twist, or reach out with the body, arms, and/or legs
58 Explosive Strength
The ability to use short bursts of muscle force to propel oneself (as in jumping or sprinting), or to throw an object
54 Perceptual Speed
The ability to quickly and accurately compare letters, numbers, objects, pictures, or patterns. The things to be compared may be presented at the same time or one after the other. This ability also includes comparing a presented object with a remembered object
54 Written Comprehension
The ability to read and understand information and ideas presented in writing
54 Multilimb Coordination
The ability to coordinate movements of two or more limbs together (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the body is in motion
54 Sound Localization
The ability to tell the direction from which a sound originated
54 Auditory Attention
The ability to focus on a single source of auditory (hearing) information in the presence of other distracting sounds
54 Hearing Sensitivity
The ability to detect or tell the difference between sounds that vary over broad ranges of pitch and loudness
54 Dynamic Strength
The ability to exert muscle force repeatedly or continuously over time. This involves muscular endurance and resistance to muscle fatigue
50 Number Facility
The ability to add, subtract, multiply, or divide quickly and correctly
46 Reaction Time
The ability to quickly respond (with the hand, finger, or foot) to one signal (sound, light, picture, etc.) when it appears
42 Spatial Orientation
The ability to know one's location in relation to the environment, or to know where other objects are in relation to one's self
42 Deductive Reasoning
The ability to apply general rules to specific problems to come up with logical answers. It involves deciding if an answer makes sense.
42 Response Orientation
The ability to choose quickly and correctly between two or more movements in response to two or more signals (lights, sounds, pictures, etc.). It includes the speed with which the correct response is started with the hand, foot, or other body parts
42 Oral Comprehension
The ability to listen to and understand information and ideas presented through spoken words and sentences
38 Inductive Reasoning
The ability to combine separate pieces of information, or specific answers to problems, to form general rules or conclusions. It includes coming up with a logical explanation for why a series of seemingly unrelated events occur together.
38 Flexibility of Closure
The ability to identify or detect a known pattern (a figure, object, word, or sound) that is hidden in other distracting material
38 Selective Attention
The ability to concentrate and not be distracted while performing a task over a period of time
33 Mathematical Reasoning
The ability to understand and organize a problem and then to select a mathematical method or formula to solve the problem
33 Oral Expression
The ability to communicate information and ideas in speaking so others will understand
33 Written Expression
The ability to communicate information and ideas in writing so others will understand
33 Speed of Limb Movement
The ability to quickly move the arms or legs
33 Category Flexibility
The ability to produce many rules so that each rule tells how to group (or combine) a set of things in a different way.
33 Time Sharing
The ability to efficiently shift back and forth between two or more activities or sources of information (such as speech, sounds, touch, or other sources)
29 Depth Perception
The ability to judge which of several objects is closer or farther away from the observer, or to judge the distance between an object and the observer
25 Speech Clarity
The ability to speak clearly so that it is understandable to a listener
25 Fluency of Ideas
The ability to come up with a number of ideas about a given topic. It concerns the number of ideas produced and not the quality, correctness, or creativity of the ideas.
21 Speed of Closure
The ability to quickly make sense of information that seems to be without meaning or organization. It involves quickly combining and organizing different pieces of information into a meaningful pattern
21 Dynamic Flexibility
The ability to quickly and repeatedly bend, stretch, twist, or reach out with the body, arms, and/or legs
21 Originality
The ability to come up with unusual or clever ideas about a given topic or situation, or to develop creative ways to solve a problem
21 Speech Recognition
The ability to identify and understand the speech of another person
17 Peripheral Vision
The ability to see objects or movement of objects to one's side when the eyes are focused forward
17 Gross Body Coordination
The ability to coordinate the movement of the arms, legs, and torso together in activities where the whole body is in motion
13 Rate Control
The ability to time the adjustments of a movement or equipment control in anticipation of changes in the speed and/or direction of a continuously moving object or scene
13 Far Vision
The ability to see details at a distance
13 Night Vision
The ability to see under low light conditions
13 Stamina
The ability to exert one's self physically over long periods of time without getting winded or out of breath
8 Gross Body Equilibrium
The ability to keep or regain one's body balance or stay upright when in an unstable position
8 Glare Sensitivity
The ability to see objects in the presence of glare or bright lighting
WORK ACTIVITIES:
Work activities elements are ranked by importance.
92 Handling and Moving Objects
Using one's own hands and arms in handling, installing, forming, positioning, and moving materials, or in manipulating things, including the use of keyboards.
83 Repairing and Maintaining Electrical Equipment
Fixing, servicing, adjusting, regulating, calibrating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles.
79 Monitor Processes, Material, or Surroundings
Monitoring and reviewing information from materials, events, or the environment, often to detect problems or to find out when things are finished.
79 Inspecting Equipment, Structures, or Material
Inspecting or diagnosing equipment, structures, or materials to identify the causes of errors or other problems or defects.
71 Performing General Physical Activities
Performing physical activities that require moving one's whole body, such as in climbing, lifting, balancing, walking, stooping, where the activities often also require considerable use of the arms and legs, such as in the physical handling of materials.
67 Controlling Machines and Processes
Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
63 Getting Information Needed to Do the Job
Observing, receiving, and otherwise obtaining information from all relevant sources.
54 Updating and Using Job-Relevant Knowledge
Keeping up-to-date technically and knowing one's own jobs' and related jobs' functions.
54 Identifying Objects, Actions, and Events
Identifying information received by making estimates or categorizations, recognizing differences or similarities, or sensing changes in circumstances or events.
54 Evaluating Information Against Standards
Evaluating information against a set of standards and verifying that it is correct.
50 Repairing and Maintaining Mechanical Equipment
Fixing, servicing, aligning, setting up, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.
46 Judging Qualities of Things, Services, or People
Making judgments about or assessing the value, importance, or quality of things or people.
46 Implementing Ideas or Programs
Conducting or carrying out work procedures and activities in accord with one's own ideas or information provided through directions/instructions for purposes of installing, modifying, preparing, delivering, constructing, integrating, finishing, or completing programs, systems, structures, or products.
38 Making Decisions and Solving Problems
Combining, evaluating, and reasoning with information and data to make decisions and solve problems. These processes involve making decisions about the relative importance of information and choosing the best solution.
33 Analyzing Data or Information
Identifying underlying principles, reasons, or facts by breaking down information or data into separate parts.
33 Estimating Needed Characteristics
Estimating the Characteristics of Materials, Products, Events, or Information: Estimating sizes, distances, and quantities, or determining time, costs, resources, or materials needed to perform a work activity.
29 Monitoring and Controlling Resources
Monitoring and controlling resources and overseeing the spending of money.
25 Processing Information
Compiling, coding, categorizing, calculating, tabulating, auditing, verifying, or processing information or data.
25 Organizing, Planning, and Prioritizing
Developing plans to accomplish work, and prioritizing and organizing one's own work.
21 Operating Vehicles or Equipment
Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or water craft.
21 Communicating With Other Workers
Providing information to supervisors, fellow workers, and subordinates. This information can be exchanged face-to-face, in writing, or via telephone/electronic transfer.
21 Establishing and Maintaining Relationships
Developing constructive and cooperative working relationships with others.
17 Documenting or Recording Information
Entering, transcribing, recording, storing, or maintaining information in either written form or by electronic/magnetic recording.
13 Thinking Creatively
Originating, inventing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions.
13 Performing Administrative Activities
Approving requests, handling paperwork, and performing day-to-day administrative tasks.
13 Drafting and Specifying Technical Devices
Providing documentation, detailed instructions, drawings, or specifications to inform others about how devices, parts, equipment, or structures are to be fabricated, constructed, assembled, modified, maintained, or used.
8 Interacting With Computers
Controlling computer functions by using programs, setting up functions, writing software, or otherwise communicating with computer systems.
4 Interpreting Meaning of Information to Others
Translating or explaining what information means and how it can be understood or used to support responses or feedback to others.
WORK CONTEXT:
Work context elements are ranked by frequency (F), importance (I), responsibility (R), amount of contact (C), how serious (S), objective vs. subjective (O), automation (A), extent of frustration (E), responsible for health and safety (H), likelihood of injury (L), degree of injury (D) .
88 (F) Indoors
How frequently does this job require the worker to work: Indoors
83 (F) Using Hands on Objects, Tools, Controls
How much time in a usual work period does the worker spend: Using hands to handle, control, or feel objects, tools or controls?
79 (F) Common Protective or Safety Attire
How often does the worker wear: Common protective or safety attire, such as safety shoes, glasses, gloves, hearing protection, hard-hat, or personal flotation device?
77 (I) Importance of Being Sure All Is Done
How important is it to be sure that all the details of this job are performed and everything is done completely?
70 (I) Importance of Being Exact or Accurate
How important is being very exact or highly accurate in performing this job?
67 (F) Standing
How much time in a usual work period does the worker spend: Standing?
63 (F) Making Repetitive Motions
How much time in a usual work period does the worker spend: Making repetitive motions?
54 (F) Hazardous Equipment
How often does this job require the worker to be exposed to harardous equipment? Hazardous Equipment (e.g., saws, machinery/mechanical parts include exposure to vehicular traffic, but not driving a vehicle)
54 (F) Sitting
How much time in a usual work period does the worker spend: Sitting?
50 (S) Consequence of Error
How serious would the result usually be if the worker made a mistake that was not readily correctable?
50 (I) Pace Determined by Speed of Equipment
How important is it to this job that the pace is determined by the speed of equipment or machinery? (This does not refer to keeping busy at all times on this job.)
47 (I) Importance of Repeating Same Tasks
How important is repeating the same physical activities (e.g., key entry) or mental activities (e.g., checking entries in a ledger) over and over, without stopping, to performing this job?
46 (F) Walking or Running
How much time in a usual work period does the worker spend: Walking or running?
46 (F) Contaminants
How often during a usual work period is the worker exposed to the following conditions: Contaminants (pollutants, gases, dust, odors, etc.)?
46 (F) Special Uniform
How often does the worker wear: A special uniform, such as that of a commercial pilot, nurse, police officer, or military personnel?
46 (F) Sounds or Noise Levels Are Distracting
How often during a usual work period is the worker exposed to the following conditions: Sounds and noise levels that are distracting and uncomfortable?
43 (D) Hazardous Equipment
If injury, due to exposure to hazardous equipment, were to occur while performing this job, how serious would be the likely outcome? Hazardous Equipment (e.g., saws, machinery/mechanical parts include exposure to vehicular traffic, but not driving a vehicle)
38 (F) Bending or Twisting the Body
How much time in a usual work period does the worker spend: Bending or twisting the body?
38 (F) Hazardous Situations
How often does this job require the worker to be exposed to harardous situations? Hazardous Situations involving likely cuts, bites, stings, or minor burns
38 (F) Kneeling, Crouching or Crawling
How much time in a usual work period does the worker spend: Kneeling, stooping, crouching or crawling?
36 (L) Hazardous Equipment
What is the likelihood that the worker would be injured as a result of being exposed to hazardous equipment while performing this job? Hazardous Equipment (e.g., saws, machinery/mechanical parts include exposure to vehicular traffic, but not driving a vehicle)
33 (F) Cramped Work Space, Awkward Positions
How often during a usual work period is the worker exposed to the following conditions: Cramped work space that requires getting into awkward positions?
31 (A) Degree of Automation
Indicate the level of automation of this job.
28 (E) Frustrating Circumstances
To what extent do frustrating circumstances ("road blocks" to work that are beyond the worker's control) hinder the accomplishment of this job?
26 (L) Hazardous Situations
What is the likelihood that the worker would be injured as a result of being exposed to hazardous situations while performing this job? Hazardous Situations involving likely cuts, bites, stings, or minor burns
25 (F) Hazardous Conditions
How often does this job require the worker to be exposed to hazardous conditions? Hazardous Conditions (e.g., high voltage electricity, combustibles, explosives, chemicals; do not include hazardous equipment or situations)
25 (F) Outdoors
How frequently does this job require the worker to work: Outdoors
25 (F) Extremely Bright or Inadequate Lighting
How often during a usual work period is the worker exposed to the following conditions: Extremely bright or inadequate lighting conditions?
21 (F) Very Hot
How often during a usual work period is the worker exposed to the following conditions: Very hot (above 90 F) or very cold (under 32 F) temperatures?
20 (I) Importance of Being Aware of New Events
How important is being constantly aware of either frequently changing events (e.g. security guard watching for shoplifters) or infrequent events (e.g. radar operator watching for tornadoes) to performing this job?
20 (D) Hazardous Conditions
If injury, due to exposure to hazardous conditions, were to occur while performing this job, how serious would be the likely outcome? Hazardous Conditions (e.g., high voltage electricity, combustibles, explosives, chemicals; do not include hazardous equipment or situations)
20 (D) Hazardous Situations
If injury, due to exposure to hazardous situations, were to occur while performing this job, how serious would be the likely outcome? Hazardous Situations involving likely cuts, bites, stings, or minor burns
19 (H) Responsible for Health and Safety of Others
How responsible is the worker for others' health and safety on this job?
19 (L) Hazardous Conditions
What is the likelihood that the worker would be injured as a result of being exposed to hazardous conditions while performing this job? Hazardous Conditions (e.g., high voltage electricity, combustibles, explosives, chemicals; do not include hazardous equipment or situations)
17 (I) Deal With External Customers
How important are interactions requiring the worker to: Deal with external customers (e.g., retail sales) or the public in general (e.g., police work)?
17 (F) Frequency in Conflict Situations
How frequently do the job requirements place the worker in conflict situations?
17 (F) Keeping or Regaining Balance
How much time in a usual work period does the worker spend: Keeping or regaining balance?
13 (I) Provide a Service to Others
How important are interactions requiring the worker to: Provide a service to others (e.g., customers)?
13 (F) Climbing Ladders, Scaffolds, Poles, etc.
How much time in a usual work period does the worker spend: Climbing ladders, scaffolds, poles, etc?
11 (C) Job-Required Social Interaction
How much does this job require the worker to be in contact (face-to-face, by telephone, or otherwise) with others in order to perform it?
11 (O) Objective or Subjective Information
How objective or subjective is the information communicated in this job?
10 (R) Responsibility for Outcomes and Results
How responsible is the worker for work outcomes and results of other workers?
10 (I) Coordinate or Lead Others
How important are interactions requiring the worker to: Coordinate or lead others in accomplishing work activities (not supervision)?
8 (F) Specialized Protective or Safety Attire
How often does the worker wear: Specialized protective or safety attire, such as breathing apparatus, safety harness, full protection suit, or radiation protection?
8 (F) Deal With Unpleasant or Angry People
How frequently does the worker have to deal with unpleasant, angry, or discourteous individuals as part of the job requirements?
8 (F) Whole Body Vibration
How often during a usual work period is the worker exposed to the following conditions: Whole body vibration (e.g., operating a jackhammer or earthmoving equipment)?
7 (I) Take a Position Opposed to Others
How important are interactions requiring the worker to: Take a position opposed to coworkers or others?
5 (L) High Places
What is the likelihood that the worker would be injured as a result of being exposed to high places while performing this job? High Places (e.g., heights above 8 feet on ladders, poles, scaffolding, catwalks, etc.)
4 (F) Radiation
How often does this job require the worker to be exposed to radiation?
4 (F) High Places
How often does this job require the worker to be exposed to high places? High Places (e.g., heights above 8 feet on ladders, poles, scaffolding, catwalks, etc.)
3 (D) High Places
If injury, due to exposure to high places, were to occur while performing this job, how serious would be the likely outcome? High Places (e.g., heights above 8 feet on ladders, poles, scaffolding, catwalks, etc.)
3 (D) Radiation
If injury, due to exposure to radiation, were to occur while performing this job, how serious would be the likely outcome?
3 (I) Persuade Someone to a Course of Action
How important are interactions requiring the worker to: Persuade someone to a course of action (informally) or influence others to buy something (to sell)?
3 (I) Supervise, Coach, Train Others
How important are interactions requiring the worker to: Supervise, coach, train, or develop other employees?
2 (L) Radiation
What is the likelihood that the worker would be injured as a result of being exposed to radiation while performing this job?
INTERESTS:
Interest elements are ranked by occupational interest.
94 Realistic
Realistic occupations frequently involve work activities that include practical, hands-on problems and solutions. They often deal with plants, animals, and real-world materials like wood, tools, and machinery. Many of the occupations require working outside, and do not involve a lot of paperwork or working closely with others.
44 Conventional
Conventional occupations frequently involve following set procedures and routines. These occupations can include working with data and details more than with ideas. Usually there is a clear line of authority to follow.
28 Investigative
Investigative occupations frequently involve working with ideas, and require an extensive amount of thinking. These occupations can involve searching for facts and figuring out problems mentally.
17 Enterprising
Enterprising occupations frequently involve starting up and carrying out projects. These occupations can involve leading people and making many decisions. Sometimes they require risk taking and often deal with business.
11 Social
Social occupations frequently involve working with, communicating with, and teaching people. These occupations often involve helping or providing service to others.
11 Artistic
Artistic occupations frequently involve working with forms, designs and patterns. They often require self-expression and the work can be done without following a clear set of rules.
WORK VALUES:
Work values elements are ranked by extent.
61 Support-Mean Extent
Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.
53 Working Conditions-Mean Extent
Occupations that satisfy this work value offer job security and good working conditions. Corresponding needs are Activity, Compensation, Independence, Security, Variety and Working Conditions.
50 Achievement-Mean Extent
Occupations that satisfy this work value are results oriented and allow employees to use their strongest abilities, giving them a feeling of accomplishment. Corresponding needs are Ability Utilization and Achievement.
44 Relationships-Mean Extent
Occupations that satisfy this work value allow employees to provide service to others and work with co-workers in a friendly non-competitive environment. Corresponding needs are Co-workers, Moral Values and Social Service.
38 Recognition-Mean Extent
Occupations that satisfy this work value offer advancement, potential for leadership, and are often considered prestigious. Corresponding needs are Advancement, Authority, Recognition and Social Status.
30 Independence-Mean Extent
Occupations that satisfy this work value allow employs to work on their own and make decisions. Corresponding needs are Creativity, Responsibility and Autonomy.
88 Moral Values
Workers on this job are never pressured to do things that go against their sense of right and wrong
72 Independence
Workers on this job do their work alone
66 Company Policies and Practices
Workers on this job are treated fairly by the company
66 Activity
Workers on this job are busy all the time
63 Supervision, Human Relations
Workers on this job have supervisors who back up their workers with management
56 Supervision, Technical
Workers on this job have supervisors who train their workers well
56 Working Conditions
Workers on this job have good working conditions
50 Advancement
Workers on this job have opportunities for advancement
50 Ability Utilization
Workers on this job make use of their individual abilities
50 Security
Workers on this job have steady employment
50 Achievement
Workers on this job get a feeling of accomplishment
44 Compensation
Workers on this job are paid well in comparison with other workers
44 Social Status
Workers on this job are looked up to by others in their company and their community
38 Recognition
Workers on this job receive recognition for the work they do
34 Co-workers
Workers on this job have co-workers who are easy to get along with
34 Responsibility
Workers on this job make decisions on their own
31 Variety
Workers on this job have something different to do every day
31 Autonomy
Workers on this job plan their work with little supervision
25 Creativity
Workers on this job try out their own ideas
19 Authority
Workers on this job give directions and instructions to others
9 Social Service
Workers on this job have work where they do things for other people
CROSSWALKS:
| DOT91 (Dictionary of Occupational Titles): |
721684014 Assembler, Carbon Brushes 721684026 Spider Assembler 721484010 Electric-Motor Winder 721484014 Field-Ring Assembler 721484022 Skein Winder 721684022 Electric-Motor Assembler |
| AIM97 (Apprenticeship Information Management): |
No crosswalks |
| CEN90 (1990 Census Occupations): |
785 Assemblers |
| CIP90 (Classification of Instructional Programs): |
470101 Electrical and Electronics Equipment Installer and Repairer, |
| GOE93 (Guide for Occupational Exploration): |
060232 Production Work: Manual Work, Assorted Materials 060223 Production Work: Manual Work, Assembly Small Parts 060423 Elemental Work: Industrial: Manual Work, Assembly Small Parts |
| MOC97 (Military Occupational Codes): |
No crosswalks |
| OES98 (Occupational Employment Statistics): |
93905 Electrical and Electronic Assemblers |
| OPM97 (Office of Personnel Management Occupations): |
No crosswalks |
| SOC98 (Standard Occupational Classification): |
No crosswalks |
